210.86 €/pc net price | |
221.96 €/pc net price | |
Minimum price for 30 days: 210.86 €/pc net price | |
Color White or dyed |
For weather-resistant, crack covering coatings on cracked exterior render and concrete surfaces. Also suitable for the protection of substrates against environmental effects and aggressive airborne pollutants.
Synthetic resin dispersion/emulsion according to German standard DIN 55945.
White.
Can be tinted to a max. of 10 % with CaparolColor or AmphiColor® (AVA) colourants. If more than one bucket/container is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences.
Tintable via the ColorExpress tinting & mixing machine system in colour shades of all current colour collections. Check tinted product before applying to avoid colour deviation. Always use tinted paint of same batch, when applying on seamless surfaces.
Brilliant, intensive colours may have a lower opacity (hiding/covering power). Hence, it is advisable to apply a first coat in a similar hiding pastel tint, based on white. Possibly a second finishing coat may be necessary.
Colour Stability as per German BFS-Merkblatt (Data Sheet) No. 26:
Class: A Group: 1 to 3, depending on the colour.
Silk-matt, G2
Keep in a cool, but frost-free place.
Characteristics according to DIN EN 1062. Tinting may cause variations.
< 100 µm, S1
100 - 200 µm, E3
≥ 0.14 - < 1.4 m (medium), V2
> 50 m, C1
≤ 0.1 [kg/(m2 · h0,5)] (low), W3
See crack types and relating treatment descriptions in the following chapter. Tinting may cause variations in the technical characteristics.
Interior 1 | Interior 2 | Interior 3 | Exterior 1 | Exterior 2 |
– | – | – | + | + |
(–) inapplicable / (○) of limited suitability / (+) suitable |
Apply with paint brush, roller or spraying equipment.
Airless Application:
Spray angle: 50°; Nozzle size: 0.025” – 0.031"; Spray pressure: 150 bar
Minimum 230 ml/m2 per coat.
Low Temperature Limit for Application and Drying:
+ 8 °C for product, substrate and ambient air.
At +20 °C and 65 % relative humidity rainproof after 24 hours. Lower temperatures and higher humidity extend the drying time.
As usual for facade paints, Cap-elast system products must not be applied in direct sunlight or on sun heated surfaces, during strong wind, fog or rain, high relative humidity, imminent rain or impending night frost. Apply wet-on-wet and without interruption to avoid lapping. Stir and sieve the paint thoroughly before airless spray application.
Do not apply on horizontal surfaces exposed to rain or moisture. Do not apply on calcareous (high lime) substrates and lightweight renders/plasters.
Mechanical loads/scratching on matt or silk-matt facade paints in dark shades may produce bright-toned scuff marks as a product specific property (no writing resistance).
In case of moist weather conditions (rain, dew, fog) yellowish transparent traces of additives, showing a slightly glossy shine and stickiness, may occur on the surface of compact, cool substrates or by means of delayed drying caused by the weather. These traces of additives are water-soluble and will disappear under the influence of a sufficient water quantity, e.g. repeated intensive rainfalls. The quality of the dried coating will not be affected by these changes. In case of direct reworking, all traces of additives must be pre-wetted and completely removed after a short reaction time. An additional priming coat of CapaGrund Universal must be applied. The traces cannot occur when the paint is applied under suitable climatic conditions.
Touching up surfaces is depending on many parameters and may be visible after drying.
Germany: See BFS-Merkblatt (Data Sheet) No. 25.
Statical (structural/constructional) cracks may be subject to extreme movements. Therefore a durable and invisible crack bridging treatment by paint products is impossible. Traction and shear stress in masonry can be absorbed, when using the DESOI Spiral Anchor System. The spiral anchor works like a highly winded spring in linear zones.
Joints in the vicinity of windows, doors and window sills must be sealed in a technically correct manner with permanently elastic sealing compound.
Facades in special climatic conditions (high degree of moisture) or subjected to a higher influence of atmospheric exposure: The use of our special product Cap-elast Phase 2-W is advisable. Cap-elast Phase 2-W is provided with a preservative against deterioration in the coating film due to algal and fungal attack and offers a long-lasting protection, but the algicidal & fungicidal effect is limited by the special facade conditions, e.g. intensity of attack and moisture loads. Thus, a durable protection cannot be guaranteed.